Mold manufacturing process
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2021-12-14 10:47
- Views:
Mold manufacturing process
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2021-12-14 10:47
- Views:
Mold manufacturing refers to the processing of forming and parison tools, in addition to cutting and die-cutting dies. Generally speaking, the mold is composed of an upper mold and a lower mold. The steel plate is placed between the upper mold and the lower mold and forms the material under the action of the press. When the press is opened, the workpiece or the corresponding waste material determined by the shape of the mold is taken out. Planning steps for precision mold processing?
Mold processing
1. Bottom surface processing, processing quality assurance;
2. The billet reference is correct, check the margin of the two-dimensional and three-dimensional contours;
3.2D, 3D surface roughing, non-installation and non-working for plane design processing (including safety platform surface, buffer mounting surface, pressure plate passing plane, side reference surface);
4. Before semi-finishing, find the correct accuracy on the side reference surface;
5. Semi-finishing 2D, 3D profile, finishing and all kinds of equipment to install a working surface (including two limit block installation surface and contact surface, insert block installation surface and backside, punch installation surface, waste cutter Mounting surface and backside, spring mounting surface and contact surface, working surface, inclined wedge mounting surface and backside due to various working stroke time constraints), semi-finishing all kinds of guide surfaces and guide holes, leaving a margin for finishing technology Process design datum hole and height as datum plane, and record information data;
Recommended
Find us on socail media
ADD:NO.58 MingHui Rd.,New Mould Town,XinQian,HuangYan,TaiZhou,ZheJiang,ChinaMOB: 13905761288
Wechat:bosenmould
TEL:0086-576-84612388
FAX:0086-576-84612333
E-mail:china@bosenmould.com